FAQ's

New Wells

Water quality can vary from location to location so it can be very hard to know for sure what the quality of water at your site will be. Through our experiences drilling in the Northwoods area and from servicing other wells, Jelinek Well Drilling has a general idea of what the water quality may be. Another way that you can investigate the quality level is to ask neighbors how their water is. Want to know more? Contact Us
Distance from the home to the well is not a big issue. At Jelinek Well Drilling, we generally try to place the well between 10' and 15' away from the home to keep trenching costs down. Want to know more? Contact Us
Depending on well depth and ground formation, it usually takes 1 day or less to drill the well and an additional day for the pump crew to hook it up and bring water into the home. Want to know more? Contact Us
Yes. As with any construction project, coordination between subcontractors is important to avoid having one crew being in the way of another. For instance, it's better to have the well pump and tank installed and ready for the plumbing contractor to finish before they are on-site to avoid them having to return to complete their work. Want to know more? Contact Us
A drilled well is usually 6" in diameter, has a submersible pump and generally has more water pressure and volume. A point (driven) well is usually 2" in diameter and has an above ground pump. A drilled well is much easier to start up and shut down for seasonal cabins. Want to know more? Contact Us
In our area, the average wells range from 60'–80' in depth depending on elevation and geology. Wells can be as shallow as 25' or as deep as 350'. Want to know more? Contact Us
There are certain setbacks for septic systems, sump basins, and old landfills. Please contact us for specific setbacks that you may need to be concerned with.
Though there may be more codes depending on your location, you will need to have your well at least 25' from your septic tank and sump basin, if applicable, and 50' from your septic drain field and alternate site. Want to know more? Contact Us

There will be a temporary taste from the new pipes and fittings used. It should go away in a couple of days with water usage. You will have rusty water for 2–3 months (possibly as long as 6 months) — this is from the new well casing. When we drill, it sandblasts the inside of the well casing down to bare steel. This will emit rust particles until a solid rust lining is built up in the well.

Using a lot of water will help clear it up quicker. You can also run a garden hose at 2–3 gallons per minute to allow the pump to cycle, creating a "washing" effect in the well. Want to know more? Contact Us

Existing Wells

If you feel that your well is compromised, please contact us to determine the problem and a remedy. You may also contact your local DNR Private Drinking Water Section — they are there to help you so don't be afraid to call. The Northern District's phone number is: 715-365-8900. Want to know more? Contact Us
If your well is not contaminated with anything unsafe, you have a number of options from a variety of water conditioner companies. Additionally, it is possible to redrill into a different aquifer water source. Jelinek Well Drilling offers well chlorination services for the treatment of iron bacteria and to disinfect your well. Click here for more information.

General

Yes. State law requires that drilling firms be licensed in the state they are drilling in. Currently, Jelinek Well Drilling is licensed in Wisconsin. Want to know more? Contact Us
Unfortunately, due to geological conditions water quality and quantity cannot be guaranteed. Want to know more? Contact Us
If constructed properly and depending on water characteristics, a drilled well can last the homeowner's lifetime. Want to know more? Contact Us
We offer the following services: hydrofracturing, submersible pump service and replacement, underground boring, well and pump system inspections, well abandonment, and shock chlorination of wells. Want to know more? Contact Us